Axminster TSCE-12R Instrukcja Obsługi Pobierz pdf (Strona 18)

Mounting Rip Fence Support Bracket

Adjust the rip fence support Bracket flush with

the Table by turning four set screw A

(Figure.9) and using a straight edge.

Check the water level once again after

tightening B (Figure. 9) two hex cap screw.

Figure. 9

Figure 10

Figure 11

Emergency Foot Operated Stop Switch

This switch ( Figure 10.) is provided for use in

emergency situation only, do not

remove that it is used in lieu of the mushroom

headed lock-off stop switch on the front of the

switch box.

The Rear Extension Table

If an assistant is employed at the

rear of the machine to remove cut piece the Table

(Figure11.) Should be extended to the distance

between the saw blade spindle and the rear edge

of the table is at least 1200mm. The assistant

should always remain at the outfeed end of the

extension table and should not lean forward and

put his hand near to the Saw teeth.

- 18 -

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 47 48

Brak uwag

Axminster TSCE-12R Instrukcja Obsługi Strona 18